Verotest
About Us   Contact Us      
Leaders in Power Cable Diagnostics & Fault Location

Quality Testing


Cable & Phase Identification


Micro Ohm Meters

Accessories (Vivax Metrotech)
A-Frame (Vivax-Metrotech)
A-Frame (Vivax-Metrotech)
The A-frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage allowing the metallic sheath (or internal conductor) to become in contact with the ground.
 
VX5/125 Clamp (Vivax Metrotech)
VX5/125 Clamp (Vivax Metrotech)
An accessory used to apply the transmitter signal to an insulated line, removing the need to connect the transmitter signal directly to a conductor or cable sheath.
Dia. 5in (125mm)
 
VX18/450F Clamp (Vivax Metrotech)
VX18/450F Clamp (Vivax Metrotech)
A flexible clamp used to apply the transmitter signal to an insulated line, removing the need to connect the transmitter signal directly to a conductor or cable sheath.
18in flexible (Circumference 450mm)
 
LPC Seperation Filter (Vivax Metrotech)
LPC Seperation Filter (Vivax Metrotech)
The LPC separation filter (LPC) is used to safely inject a trace tone to a live cable via a domestic mains socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for connecting to voltages between 100V AC and 250V AC.
Top of Page
Remote Antenna (Vivax Metrotech)
Remote Antenna (Vivax Metrotech)
The remote antenna can be used to help identify a particular cable on a cable tray or where cables are bunched together.
 
My Locator 2 Software
My Locator 2 Software
MyLocator2 configuration tool is a software package that enables the operator to configure the vLoc series 2 of locators.

MyLocator2 allows operators

To transfer data from the locator to a host computer.
To perform software upgrade
To add splash screen to the receivers
To save the receiver configuration or use the saved configuration on other receiver
 
Bluetooth Module (Vivax Metrotech)
Bluetooth Module (Vivax Metrotech)
As an optional, the vLocPro2 and vLocML2 receivers can be fitted with a Bluetooth communications accessory. The Bluetooth option can be retrofitted and can be ordered at a later date if preferred.
 
Direct Connection Lead (Vivax Metrotech)
Direct Connection Lead (Vivax Metrotech)
Used to connect the transmitter to a line using the direct connection method.
Top of Page
Ground Spool (Vivax Metrotech)
Ground Spool (Vivax Metrotech)
Used to extend the ground connection to a suitable grounding position.
 
LOC-5TX Rechargeable Battery Pack (Vivax Metrotech)
LOC-5TX Rechargeable Battery Pack (Vivax Metrotech)
NiMH rechargeable battery pack for Loc-5Tx transmitter.
 
LOC-5TX Alkaline Battery Tray ( Vivax Metrotech)
LOC-5TX Alkaline Battery Tray ( Vivax Metrotech)
Alkaline battery tray for Loc-5Tx transmitter. Requires 8 x Alkaline D cells.
 
LOC-5TX/10TX Charger (Vivax Metrotech)
LOC-5TX/10TX Charger (Vivax Metrotech)
Mains charger (100-250V AC input) used to charge 5 Watt or 10 Watt transmitters rechargeable battery packs. Supplied as standard with rechargeable battery option.
Top of Page
LOC-10TX Battery Tray (Vivax Metrotech)
LOC-10TX Battery Tray (Vivax Metrotech)
NiMH rechargeable battery pack. Only use charger supplied.
 
Receiver Lithium-Ion Rechargeable Battery Pack (Vivax Metrotech)
Receiver Lithium-Ion Rechargeable Battery Pack (Vivax Metrotech)
The Lithium-ion rechargeable battery pack is supplied as standard for receivers. Charging is done with the battery inside the receiver.
 
Receiver Standard Battery Charger (Vivax Metrotech)
Receiver Standard Battery Charger (Vivax Metrotech)
The receiver Lithium-ion battery charger is supplied as a standard item. It is powered from the mains supply. (100-250V AC)
 
Receiver Alkaline Battery Holder (Vivax Metrotech)
Receiver Alkaline Battery Holder (Vivax Metrotech)
This alkaline battery holder is supplies as standard and is used in the event the rechargeable battery pack has fully discharged. It can be considered as a backup battery pack. It requires 6 x AA alkaline batteries.
Top of Page
Ground Stake (Vivax Metrotech)
Ground Stake (Vivax Metrotech)
Used to make an independent connection to the ground so as to complete the circuit when the transmitter is connected to a line using the direct connection method.
 
VM MAP APP for Smart Phones (Android)
VM MAP APP for Smart Phones (Android)
VM-MAP is highly compatible with Vivax-Metrotech locator products (www.vivax-metrotech.com). It can store and display the real time locate information on the field.

Features:
1. Bluetooth connection with locator receiver and have the ability to choose to use either internal GPS on the device or external GPS.
2. All data will be logged in the device and display in real time.
3. Data are stored as KML format that easily open by Google Earth.
4. Email features available – you can email the KML file from your device
And more…...

Download the App on Google Play
       
Top of Page
TRAINING DATES
 
NEXT EVENT
 
LATEST NEWS
       
© Copyright Verotest (Pty) Ltd      email us webdevine.co.za - web design, graphic design, printing, internet, hosting, annual reports, logo design, business card design, web site, web development, email services   l   workshop   l   training   l   contacts   l   home   l   about